I used Solid Edge v20 software to make this 3D model of the rotor.....
Trust me! I'm an Engineer
Tuesday, September 28, 2010
Saturday, September 18, 2010
Design pattern for cutting of PVC pipe
This is the patternfor how to cut the PVC pipe to make six same blades for wind turbine rotor!!! click on the image to enlarge it:
if u need to make 4 blades follow the same instructions using some different required values!!!.... this is the most effective and economic way to make blades and there is no wastage of the PVC pipe at all
if u need to make 4 blades follow the same instructions using some different required values!!!.... this is the most effective and economic way to make blades and there is no wastage of the PVC pipe at all
Sunday, September 5, 2010
Here is the Lay out of my project
This is a flow chart symmetric diagram of my project..... everything is in sequence!!!.....
1. Wind turbine:
The purpose of wind turbine is to gain the energy from the air and convert it into Electrical energy. This is done by spinning the shaft of the turbine to produce current.
2. Charge controller:
The heart of this project is the charge controller, which is so callend the manager... it regulates the current and supply this to the battries at low current and high voltage to charge them.
3. Batteries:
As most of u know what does a battery is used for... all the batteries are connected in parallel and thus is called Battery Bank.
4. Inverter:
The last part is the inverter whose application is simple that it just converts the 12 volts to 220 volts to rum home appliances.... if ur batteries are 100AH then u might get a backup of 4~5 hours of free electricity!
1. Wind turbine:
The purpose of wind turbine is to gain the energy from the air and convert it into Electrical energy. This is done by spinning the shaft of the turbine to produce current.
2. Charge controller:
The heart of this project is the charge controller, which is so callend the manager... it regulates the current and supply this to the battries at low current and high voltage to charge them.
3. Batteries:
As most of u know what does a battery is used for... all the batteries are connected in parallel and thus is called Battery Bank.
4. Inverter:
The last part is the inverter whose application is simple that it just converts the 12 volts to 220 volts to rum home appliances.... if ur batteries are 100AH then u might get a backup of 4~5 hours of free electricity!
Tuesday, August 31, 2010
My Charge controller circuit and multi meter......
This is the charge controller.... used to manage current to the batteries!!... it regulates the voltage!!!....will be connected to the wind turbine and batteries!!
i love my multimeter.... its awesome.... i dont know what would i do without it.....
i love my multimeter.... its awesome.... i dont know what would i do without it.....
Labels:
avometer,
charge,
circuit,
controller,
multimeter
Monday, August 30, 2010
1000 Watt invertor
A 1000 Watt inverter ..... will b connected to the 12 volts battries... to supply 240 volts to run home appliances
Some new accessories i bought 4 my project.....
Some new accessories i bought 4 my project.....
Tuesday, August 24, 2010
Wind turbine rotor test drive!!!
This is my youtube video of my home made Wind turbine rotor from washing machine blade do check out!!!
my home made PVC blades, test drive of the wind rotor.... in approx. ~4m/s wind speed...i'll upload all the videos of my wind turbine project, but do subscribe!!!
I'm doing mechanical engineering from UET Lahore, 2007 session
my home made PVC blades, test drive of the wind rotor.... in approx. ~4m/s wind speed...i'll upload all the videos of my wind turbine project, but do subscribe!!!
I'm doing mechanical engineering from UET Lahore, 2007 session
Friday, August 20, 2010
My wind turbine....
Currently i'm working on a project .... that is about a wind turbine installation .... i'm gonna upload sum of its pics....
1) Step 1
cutting of pvc pipe for making turbine rotor.
still cutting
disc i used to mount rotor blades
final shape of the blades
These are spare blades... that can b used as a replacement is in case any blade is broken
Assembled wind rotor.... using nuts and bolts
1) Step 1
cutting of pvc pipe for making turbine rotor.
still cutting
disc i used to mount rotor blades
final shape of the blades
These are spare blades... that can b used as a replacement is in case any blade is broken
Assembled wind rotor.... using nuts and bolts
Thursday, August 19, 2010
Hey friends just signed up with the blogger
i'm starting this blog ....i'm am doing mechanical engineering from UET lahore!!.... My age is 20 and i'm a scorpion... plz dont forget to follow my page!!!
Search Results!!
Search Results!!
Subscribe to:
Posts (Atom)